当前位置: X-MOL 学术Appl. Phys. A › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Colossal dielectric permittivity of Nylon-6 matrix-based composites with nano-TiO2 fillers
Applied Physics A ( IF 2.7 ) Pub Date : 2020-03-11 , DOI: 10.1007/s00339-020-3445-4
Sunil Meti , Udaya K. Bhat , M. Rizwanur Rahman

Herein, the nanocomposite films of Nylon-6 with reinforced nano-TiO2 were explored for their charge storage capacity. The high dielectric constant (e) of TiO2, along with its compatibility with Nylon-6, formed the basis for the present study. TiO2 nanoparticles were synthesized initially using hydrothermal technique. The microscopic uniformity and anatase-phase purity of the TiO2 nanoparticles were confirmed with the help of morphological and structural investigations. The effect of weight fraction of TiO2 in Nylon-6 was investigated to understand the robustness of the fabricated nanocomposites. The composite films with 5, 10 and 20 wt% of TiO2 in Nylon-6 matrix were prepared, and their dielectric behavior was explored by fabricating capacitors with parallel plate architecture. The composite film with 20 wt% TiO2 showed the highest dielectric parameters. The nanocomposite films have the exceptional dielectric quality with e ~ 124 and low dielectric loss of 0.51 at 1 kHz. The colossal dielectric nature along with minimum sophistication in the film fabrication process makes the present nanocomposite to be a potential candidate for the various electronic devices.

中文翻译:

含有纳米 TiO2 填料的 Nylon-6 基复合材料的巨大介电常数

在此,研究了具有增强纳米 TiO2 的 Nylon-6 纳米复合薄膜的电荷存储能力。TiO2 的高介电常数 (e) 及其与 Nylon-6 的兼容性构成了本研究的基础。TiO2 纳米粒子最初是使用水热技术合成的。TiO2 纳米颗粒的微观均匀性和锐钛矿相纯度在形态和结构研究的帮助下得到证实。研究了 TiO2 在 Nylon-6 中的重量分数的影响,以了解所制造的纳米复合材料的稳健性。制备了在 Nylon-6 基体中含有 5、10 和 20 wt% TiO2 的复合薄膜,并通过制造具有平行板结构的电容器来探索它们的介电行为。含有 20 wt% TiO2 的复合薄膜表现出最高的介电参数。纳米复合薄膜具有出色的介电质量,e ~ 124 和 1 kHz 时的低介电损耗为 0.51。巨大的介电性质以及薄膜制造过程中最低限度的复杂性使本纳米复合材料成为各种电子设备的潜在候选材料。
更新日期:2020-03-11
down
wechat
bug