Construction of an electrochemical pH sensor using one-pot synthesis of a molybdenum diselenide/nitrogen doped graphene oxide screen-printed electrode

Sujittra Poorahong; Wipawee Oin; Saowaluk Buapoon; Supinya Nijpanich; David J. Harding; Mohamed Siaj

doi:10.1039/D4RA01708K

Construction of an electrochemical pH sensor using one-pot synthesis of a molybdenum diselenide/nitrogen doped graphene oxide screen-printed electrode†

Sujittra Poorahong,

*^ab Wipawee Oin,^a Saowaluk Buapoon,^a Supinya Nijpanich,

^c David J. Harding

^ad and Mohamed Siaj

^e

Author affiliations

* Corresponding authors

^a Functional Materials and Nanotechnology Center of Excellence, Walailak University, Thasala, Nakhon Si Thammarat 80160, Thailand
E-mail: sujittra.po@mail.wu.ac.th

^b Department of Chemistry, School of Science, Walailak University, Thasala, Nakhon Si Thammarat 80160, Thailand

^c Synchrotron Light Research Institute (Public Organization), Nakhon Ratchasima 30000, Thailand

^d School of Chemistry, Institute of Science, Suranaree University of Technology, Nakhon Ratchasima, Thailand

^e Department of Chemistry, Université du Québec à Montréal, Montréal, Québec H3C 3P8, Canada

Abstract

In this study, a one-pot synthesis of a molybdenum diselenide/nitrogen-doped graphene oxide (MoSe₂/NGO) composite was demonstrated and used for the fabrication of an electrochemical pH sensor. The MoSe₂/NGO composite was characterized using powder X-ray diffraction, infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer–Emmett–Teller analysis. The electrochemical behavior at different pH values was determined by recording the open-circuit potential. When applied for pH detection, the MoSe₂/NGO modified screen-printed electrode (SPE) showed good linearity with a sensitivity of 61.3 mV pH⁻¹ over a wide pH range of 2–14. In addition, the pH sensor exhibited a remarkably stable response, high reproducibility, and selectivity. The sensor was used to measure the acidity or alkalinity of real food and beverage samples. The results for these samples showed a relative error of less than 10% compared with the results obtained with the commercial pH meter. The portable sensor produced by screen printing electrodes paves the way for the development of simple, cost-effective, real-time, and robust pH sensors for the pH analysis of various sample matrices for clinical diagnostics, biosensing, and cost-effective applications.

RSC Advances

Construction of an electrochemical pH sensor using one-pot synthesis of a molybdenum diselenide/nitrogen doped graphene oxide screen-printed electrode†

Abstract

Supplementary files

Article information

Download Citation

Permissions

Construction of an electrochemical pH sensor using one-pot synthesis of a molybdenum diselenide/nitrogen doped graphene oxide screen-printed electrode

Social activity

Search articles by author

Spotlight

Advertisements