Repairing humidity-induced interfacial degradation in quasi-2D perovskite solar cells printed in ambient air

Abstract

Due to the moisture sensitivity of organic cations, the presence of adsorbed water (H2Oad) during the printing process in air tends to complicate the structure transformation and poses potential hazards to the long-term operational stability, particularly in alternating-cation interlayer layered halide perovskite (LHP) solar cells with a sophisticated organic cation composition. Here, H2Oad as a nucleation medium skillfully expanded the humidity processing window for scalable LHP solar cells, revealing the feasibility of the thermodynamically favored reaction pathways in promoting atomic layer deposition in direct contact with the perovskite films without damage. Moreover, the interfacial aging mechanism and inhibition of ion diffusion were comprehensively investigated. Finally, target devices based on GA(MA)5Pb5I16 (n = 5) with effective areas of 0.09 cm2 and 1.01 cm2 exhibited impressive power conversion efficiencies of 21.0% and 19.7%, respectively, which are some of the highest values in the large-area 2D LHP devices. The target device maintained 93% of its initial efficiency over 170 days (4080 h) in an air environment, while further validating the scalability of our strategy on LHP modules with an area of 100 cm2.

Graphical abstract: Repairing humidity-induced interfacial degradation in quasi-2D perovskite solar cells printed in ambient air

Supplementary files

Article information

Article type
Paper
Submitted
28 Feb 2024
Accepted
19 Apr 2024
First published
23 Apr 2024

Energy Environ. Sci., 2024, Advance Article

Repairing humidity-induced interfacial degradation in quasi-2D perovskite solar cells printed in ambient air

Z. Xing, B. Fan, X. Meng, D. Li, Z. Huang, L. Li, Y. Zhang, F. Wang, X. Hu, T. Hu, T. Riedl and Y. Chen, Energy Environ. Sci., 2024, Advance Article , DOI: 10.1039/D4EE00912F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements