当前位置: X-MOL 学术IEEE Trans. Ind. Electron. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Control of Five-Phase Dual Stator-Winding Induction Generator With an Open Phase
IEEE Transactions on Industrial Electronics ( IF 7.7 ) Pub Date : 2019-01-01 , DOI: 10.1109/tie.2018.2835392
Haijun Xu , Wenxin Huang , Feifei Bu , Haozhe Liu , Xiaogang Lin

Dual stator-winding induction generator (DWIG) is attractive in stand-alone power systems, and the aim of this paper is to develop the dc generating system of five-phase DWIG with an open phase. First, the relationship between flux and torque is constructed based on the reduced-order transformation, modified flux, and current. Second, the relation between modified voltage and current on the dq plane is constructed. The current of fundamental plane is used for the control loop of the power-winding voltage and control-winding voltage, respectively. Third, the current of the modified secondary subspace plane is used to control the five-phase DWIG operation at minimum control-winding loss. Finally, the simulation and experimental results are given to verify that the amplitude of phase current and output voltage can be regulated effectively by the proposed control strategy.

中文翻译:

五相双定子绕组开相感应发电机的控制

双定子绕组感应发电机 (DWIG) 在独立电力系统中很有吸引力,本文的目的是开发具有开相的五相 DWIG 直流发电系统。首先,磁通和转矩之间的关系是基于降阶变换、修正磁通和电流构建的。其次,构建了 dq 平面上修正电压和电流之间的关系。基波电流分别用于电源绕组电压和控制绕组电压的控制回路。第三,修改的次级子空间平面的电流用于以最小的控制绕组损耗控制五相 DWIG 操作。最后,
更新日期:2019-01-01
down
wechat
bug