当前位置: X-MOL 学术J. Alloys Compd. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
High-pressure strengths of Ni3Al and Ni-Al-Cr
Journal of Alloys and Compounds ( IF 6.2 ) Pub Date : 2018-01-11
S.V. Raju, B.K. Godwal, A.K. Singh, R. Jeanloz, S.K. Saxena

High-pressure x-ray diffraction on Ni3Al, non-hydrostatically compressed at room temperature to 30 GPa in radial geometry can be interpreted in terms of a hydrostatic pressure–volume equation of state. We found the yield strength of Ni3Al to increase from about 0.2 to 2 GPa as pressure increases from 0 to 30 GPa. Yield-strength values determined from x-ray diffraction in axial geometry by including a Poisson ratio effect and pressure gradient methods are in good accord with each other. Our results indicate that the strengths of both pure and Cr-doped (7 at. %) Ni3Al increase with pressure, with the yield strength of Ni3Al slightly higher than Ni-Al-Cr alloy.



中文翻译:

Ni 3 Al和Ni-Al-Cr的高压强度

在Ni 3 Al上进行的高压x射线衍射,在室温下以径向静力学压缩至30 GPa,径向几何形状可以用静水压力-体积状态方程来解释。我们发现,当压力从0 GPa增加到30 GPa时,Ni 3 Al的屈服强度从约0.2 GPa增加到2 GPa。通过包括泊松比效应和压力梯度法的轴向几何学中的X射线衍射确定的屈服强度值彼此非常吻合。我们的结果表明(原子%7)的Ni都纯和Cr掺杂的长处3与压力的Al的增加,用Ni的屈服强度3的Al除Ni的Al-Cr合金略高。

更新日期:2018-01-11
down
wechat
bug