当前位置:
X-MOL 学术
›
Sol. Energy Mater. Sol. Cells
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Fabrication and characteristics of composite phase change material based on Ba(OH) 2 ·8H 2 O for thermal energy storage
Solar Energy Materials and Solar Cells ( IF 6.9 ) Pub Date : 2018-06-01 , DOI: 10.1016/j.solmat.2017.12.032 Qiangqiang Xiao , Wenhui Yuan , Li Li , Tao Xu
Solar Energy Materials and Solar Cells ( IF 6.9 ) Pub Date : 2018-06-01 , DOI: 10.1016/j.solmat.2017.12.032 Qiangqiang Xiao , Wenhui Yuan , Li Li , Tao Xu
Abstract Latent thermal energy storage using phase change material (PCM) is an effective way to store and transport energy. In this work, expanded graphite was modified using octylphenol polyoxyethylene ether to generate modified expanded graphite (MEG), and then a novel shape-stabilized Ba(OH)2·8H2O/MEG composite PCM was synthesized by incorporating Ba(OH)2·8H2O into MEG matrix. Mass fractions of Ba(OH)2·8H2O in composite PCM were calculated from 74% to 93%. The effects of MEG on properties of PCM were investigated using scanning electron microscopy, X-ray diffraction, differential scanning calorimetry and thermal constant analyzer. The results indicated that MEG had the desired compatibility with Ba(OH)2·8H2O. The phase separation of Ba(OH)2·8H2O was effectively inhibited by the MEG matrix and the supercooling temperature decreased from 13 °C for Ba(OH)2·8H2O to 2.4 °C for composite PCM with a MEG matrix density of 200 g/L. At the same matrix density, the thermal conductivity of composite PCM reached 3.58 W/(m K), 1.84 times higher than that of Ba(OH)2·8H2O. The latent heat was approximately equal to the product of the latent heat of Ba(OH)2·8H2O and its mass fraction. Moreover, the enthalpy loss of the composite PCM was negligible after 400 cycles, showing good thermal reliability.
中文翻译:
基于Ba(OH) 2 ·8H 2 O的热储能复合相变材料的制备及特性
摘要 利用相变材料(PCM)进行潜热储能是一种有效的能量储存和传输方式。在这项工作中,使用辛基酚聚氧乙烯醚对膨胀石墨进行改性,生成改性膨胀石墨 (MEG),然后通过掺入 Ba(OH)2·8H2O 合成了一种新型形状稳定的 Ba(OH)2·8H2O/MEG 复合 PCM。成 MEG 矩阵。Ba(OH)2·8H2O 在复合 PCM 中的质量分数计算为 74% 到 93%。使用扫描电子显微镜、X 射线衍射、差示扫描量热法和热常数分析仪研究了 MEG 对 PCM 性能的影响。结果表明MEG与Ba(OH)2·8H2O具有理想的相容性。MEG基体有效抑制了Ba(OH)2·8H2O的相分离,过冷温度从Ba(OH)2·8H2O的13℃降低到MEG基体密度为200g的复合PCM的2.4℃ /L。在相同基体密度下,复合相变材料的热导率达到3.58 W/(m K),是Ba(OH)2·8H2O的1.84倍。潜热约等于Ba(OH)2·8H2O的潜热与其质量分数的乘积。此外,复合 PCM 在 400 次循环后的焓损失可以忽略不计,显示出良好的热可靠性。潜热约等于 Ba(OH)2·8H2O 的潜热与其质量分数的乘积。此外,复合 PCM 在 400 次循环后的焓损失可以忽略不计,显示出良好的热可靠性。潜热约等于Ba(OH)2·8H2O的潜热与其质量分数的乘积。此外,复合 PCM 在 400 次循环后的焓损失可以忽略不计,显示出良好的热可靠性。
更新日期:2018-06-01
中文翻译:
基于Ba(OH) 2 ·8H 2 O的热储能复合相变材料的制备及特性
摘要 利用相变材料(PCM)进行潜热储能是一种有效的能量储存和传输方式。在这项工作中,使用辛基酚聚氧乙烯醚对膨胀石墨进行改性,生成改性膨胀石墨 (MEG),然后通过掺入 Ba(OH)2·8H2O 合成了一种新型形状稳定的 Ba(OH)2·8H2O/MEG 复合 PCM。成 MEG 矩阵。Ba(OH)2·8H2O 在复合 PCM 中的质量分数计算为 74% 到 93%。使用扫描电子显微镜、X 射线衍射、差示扫描量热法和热常数分析仪研究了 MEG 对 PCM 性能的影响。结果表明MEG与Ba(OH)2·8H2O具有理想的相容性。MEG基体有效抑制了Ba(OH)2·8H2O的相分离,过冷温度从Ba(OH)2·8H2O的13℃降低到MEG基体密度为200g的复合PCM的2.4℃ /L。在相同基体密度下,复合相变材料的热导率达到3.58 W/(m K),是Ba(OH)2·8H2O的1.84倍。潜热约等于Ba(OH)2·8H2O的潜热与其质量分数的乘积。此外,复合 PCM 在 400 次循环后的焓损失可以忽略不计,显示出良好的热可靠性。潜热约等于 Ba(OH)2·8H2O 的潜热与其质量分数的乘积。此外,复合 PCM 在 400 次循环后的焓损失可以忽略不计,显示出良好的热可靠性。潜热约等于Ba(OH)2·8H2O的潜热与其质量分数的乘积。此外,复合 PCM 在 400 次循环后的焓损失可以忽略不计,显示出良好的热可靠性。