-
Size effect on compressive strength of foamed concrete: Experimental and numerical studies Mater. Des. (IF 8.4) Pub Date : 2024-03-16 Nengdong Jiang, Zhi Ge, Zhiyuan Wang, Tianming Gao, Hongzhi Zhang, Yifeng Ling, Branko Šavija
[Display omitted]
-
Mechanisms for microstructural evolution of FeSiCrNi high silicon steel subjected to thermomechanical processing Mater. Des. (IF 8.4) Pub Date : 2024-03-14 Hao Feng, Tao Wang, Jianchao Han, Shuyong Jiang, Bingyao Yan, Dong Sun, Peng Lin, Lifei Wang, Liping Bian, Junbo Yu, Yanqiu Zhang
[Display omitted]
-
Titanium-Based alloys and composites for orthopedic implants Applications: A comprehensive review Mater. Des. (IF 8.4) Pub Date : 2024-03-13 Walaa Abd-Elaziem, Moustafa A. Darwish, Atef Hamada, Walid M. Daoush
[Display omitted]
-
Fabrication of low thermal expansion Fe–Ni alloys by in-situ alloying using twin-wire arc additive manufacturing Mater. Des. (IF 8.4) Pub Date : 2024-03-13 Arjun Sood, Jim Schimmel, Marko Bosman, Constantinos Goulas, Vera Popovich, Marcel J.M. Hermans
[Display omitted]
-
Integrating convolutional neural network and constitutive model for rapid prediction of stress-strain curves in fibre reinforced polymers: A generalisable approach Mater. Des. (IF 8.4) Pub Date : 2024-03-12 Zerong Ding, Hamid R Attar, Hongyan Wang, Haibao Liu, Nan Li
[Display omitted]
-
3D printer-driven design of a non-assembly titanium surgical instrument using compliant lattice flexures Mater. Des. (IF 8.4) Pub Date : 2024-03-12 Kirsten Lussenburg, Remi van Starkenburg, Aimée Sakes, Paul Breedveld
[Display omitted]
-
Unleashing the potential: NIR-II imaging-guided tumor therapy with enhanced HPTT/starvation cycle Mater. Des. (IF 8.4) Pub Date : 2024-03-12 Gui-long Wu, Senyou Tan, Juan Wu, Feirong Wang, Xiaofeng Tan, Guodong Chen, Qinglai Yang
A two-way cycle enhancement NIR-II phototheranostic platform that utilizes dual synergistic HPTT/ST disruption guided by NIR II-region fluorescence for effective tumor eradication.
-
M1 type macrophage targeted anti-inflammatory exosomes derived from BMSC for the treatment of acute and chronic inflammatory diseases Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Chuanjie Zhang, Daoyong Li, Zhe Wang, Dake Wang, Yuanjian Lu, Kaihua Zhang, Yajiang Yuan, Xifan Mei, Shurui Chen
[Display omitted]
-
Damage-tolerant behavior of structural epoxies with thin PEI and PVDF interlayers Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Dharun Vadugappatty Srinivasan, Anastasios P. Vassilopoulos
[Display omitted]
-
Computational biomechanical analysis of Ti-6Al-4V porous bone plates for lower limb fractures Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Ali Mehboob, Hassan Mehboob, Abdelhak Ouldyerou, Imad Barsoum
[Display omitted]
-
Tailoring short-range order and dislocation evolution in Cr–Co–Ni medium-entropy alloys: A molecular dynamics study Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Asker Jarlöv, Weiming Ji, Rita Babicheva, Yujia Tian, Zhiheng Hu, Hang Li Seet, Liming Tan, Feng Liu, Yong Liu, Mui Ling Sharon Nai, Upadrasta Ramamurty, Kun Zhou
[Display omitted]
-
Influence of (1 1 1) texture on bonding strength in low-temperature bonding of nanotwinned Ag films: Experimental insights and void closure modeling Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Dashi Lu, Hao Pan, Xiuqi Wang, Ying Zhong, Rongpei Shi, Hongjun Ji
[Display omitted]
-
Self-assembled titanium-based macrostructures with hierarchical (macro-, micro-, and nano) porosities: A fundamental study Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Matthew D. Wadge, Pearl A. Agyakwa, Reda M. Felfel, Richard Homer, Timothy P. Cooper, Zakhar R. Kudrynskyi, Edward Lester, Ifty Ahmed, David M. Grant
[Display omitted]
-
Precipitation behavior of a new Cu-Ni-Co-Si-Fe-Mg alloy designed with low cobalt content Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Liu-xin Qin, Tao Zhou, Xu Wang, Yan-bin Jiang, Feng Liu, Zhu Xiao, Qian Lei, Yan-lin Jia, Yi Luo, Zhou Li
[Display omitted]
-
Introducing a force-matched united atom force field to explore larger spatiotemporal domains in molecular dynamics simulations of bitumen Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Eli I. Assaf, Xueyan Liu, Peng Lin, Sandra Erkens
[Display omitted]
-
Insights into precipitation characteristics and strengthening mechanisms in a low Cu/Mg ratio Al-Cu-Mg-Ag alloy Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Qilong Liu, Xiwu Li, Wei Xiao, Zhihui Li, Kai Zhu, Kai Wen, Lizhen Yan, Yanan Li, Hongwei Yan, Yongan Zhang, Baiqing Xiong
[Display omitted]
-
Drop-on-demand metal jetting of pure copper: On the interaction of molten metal with ceramic and metallic substrates Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Negar Gilani, Nesma T. Aboulkhair, Marco Simonelli, Mark East, Richard J.M. Hague
[Display omitted]
-
Unveiling the oxidation mechanism of CrTaTiMo refractory medium-entropy alloys: A synergy of density functional theory and ab initio molecular dynamics Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Xiao Wang, Arman Hobhaydar, Yangfan Wang, David Wexler, Huijun Li, Nam V. Tran, Hongtao Zhu
[Display omitted]
-
Hierarchical porous poly (L-lactic acid) fibrous vascular graft with controllable architectures and stable structure Mater. Des. (IF 8.4) Pub Date : 2024-03-11 Chen Meng, Jun Song, Samira Malekmohammadi, Jinmin Meng, Wenyuan Wei, Renzhi Li, Jiling Feng, R. Hugh Gong, Jiashen Li
[Display omitted]
-
Asymmetric sandwiched nanofibrillated cellulose composites prepared by one-pot vacuum filtration for ultrahigh electromagnetic interference shielding Mater. Des. (IF 8.4) Pub Date : 2024-03-10 Wenjing Qi, Lingjun Zeng, Bai Xue, Changmei Wu, Xiaoping Mai, Lan Xie, Qiang Zheng
[Display omitted]
-
Compressive stress improves mechanical properties of mineralized collagen by dynamically regulating its mineralization - a closed-loop regulation mechanism Mater. Des. (IF 8.4) Pub Date : 2024-03-07 Yumiao Niu, Jiawen Chen, Ziyao Geng, Wei Wu, Hefang Cai, Chenxin Liu, Peng Cao, Yanping Zhang, Youjun Liu, Aike Qiao, Tianming Du
[Display omitted]
-
Osseointegrative and immunomodulative 3D-Printing Ti6Al4V-based implants embedded with biogenic hydroxyapatite Mater. Des. (IF 8.4) Pub Date : 2024-03-06 Sangbae Park, Juo Lee, Jong-Jin Kim, Moongi Ji, Eunbee Cho, Hyun Bo Sim, Young-Tae Chang, Jong Hoon Chung, Man-Jeong Paik, Jungsil Kim, Hoon Seonwoo
[Display omitted]
-
Microstructure, mechanical performance and nucleation mechanism of laser powder bed fused novel Sc/Zr/Ti-modified Al-Mg alloys Mater. Des. (IF 8.4) Pub Date : 2024-03-04 Xiang Li, Zhengjiang Gao, Chaolin Tan, Yunzhong Liu
[Display omitted]
-
Corrigendum to “Experimental investigation of the effect of glass fibres on the mechanical properties of polypropylene (PP) and polyamide 6 (PA6) plastics” [Mater. Des. 27(2006) 316–323] Mater. Des. (IF 8.4) Pub Date : 2024-03-04 Abdulkadir Güllü, Ahmet Özdemir, Emin Özdemir
-
Enabling cross-morphological performance comparison: A case study in heat management design Mater. Des. (IF 8.4) Pub Date : 2024-03-04 Thomas Fischer, Chitraj Bissoonauth, Haowen Liang, Jiaming Bai
[Display omitted]
-
Predicting and understanding the ductility of BCC high entropy alloys via knowledge-integrated machine learning Mater. Des. (IF 8.4) Pub Date : 2024-03-04 Xiaoya Huang, Lei Zheng, Huibin Xu, Hanwei Fu
Despite the fact that body-centered cubic high entropy alloys (BCC HEAs) exhibit exceptional strengthening mechanisms over a wide temperature range, their application is often hindered by poor room temperature ductility. Consequently, the accurate prediction of BCC ductility becomes critical in alloy design but is challenged by the intricate nature of these alloy systems. In this study, a comprehensive
-
Polydopamine nanoparticles as a non-pharmaceutical tool in the treatment of fatty liver disease Mater. Des. (IF 8.4) Pub Date : 2024-03-03 Alessio Carmignani, Matteo Battaglini, Martina Bartolucci, Andrea Petretto, Mirko Prato, Gianni Ciofani
[Display omitted]
-
Thermoresponsive block-copolymer brush-modified interfaces for effective fabrication of hepatocyte sheets Mater. Des. (IF 8.4) Pub Date : 2024-03-03 Kenichi Nagase, Marin Nagaoka, Junnosuke Matsuda, Naoto Kojima
[Display omitted]
-
Integrating continuous mineral-impregnated carbon fibers into digital fabrication with concrete Mater. Des. (IF 8.4) Pub Date : 2024-03-03 Tobias Neef, Steffen Müller, Viktor Mechtcherine
[Display omitted]
-
Kinetic module in bimetal: A biomimetic approach adapting the kinetic behavior of bimetal for adaptive Façades Mater. Des. (IF 8.4) Pub Date : 2024-03-02 Tarciana Andrade, José Beirão, Amilton Arruda, Natália Vinagre
[Display omitted]
-
Terrene 2.0: Biomaterial composites design & shellular structures development for augmented earthen construction Mater. Des. (IF 8.4) Pub Date : 2024-03-01 Liam Lasting, Mostafa Akbari, Destynn Keuchel, Na Kyung Lee, Shravan Pradeep, Shivani Chawla, Abigail Weinstein, Masoud Akbarzadeh, Laia Mogas-Soldevila
[Display omitted]
-
Recent advances in stimuli responsive hydrogels for oral disease treatment Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Yuzi Wei, Lingnan Zheng, Xi Xie, Xi Yang, Jinfeng Liao
The classification of stimuli responsive hydrogels and their application in oral diseases.
-
Bilayer-functionalized mesoporous silica nanoparticles for overcoming multiple barriers of mucus clearance, intestinal epithelium and P-glycoprotein efflux Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Biao Li, Weicheng Zhou, Xinmin Wang, Wanyi Zhong, Qin Zheng, Yingchong Chen, Pengfei Yue
[Display omitted]
-
Tuning Ga2O3-based avalanche photodetectors performance through barrier layer thickness optimization Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Qingyi Zhang, Dianmeng Dong, Fan Zhang, Yang Zhang, Zhenping Wu
[Display omitted]
-
Multifunctional chitosan-based nanocomposite microgels for reconstructing osteochondral defects Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Yifan Lu, Ze-Yu Wang, Jianhong Xiao, Zhengyi Zhao, Xiaoyu Liao, Huai-Ling Gao, Duohong Zou
[Display omitted]
-
Electrospun polyasparthydrazide nanofibrous hydrogel loading with in-situ synthesized silver nanoparticles for full-thickness skin wound healing application Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Caidan Zhang, Xun Yang, Lidan Yu, Xueshan Chen, Jiakai Zhang, Sai Zhang, Shaohua Wu
[Display omitted]
-
Biotin-decorated celastrol-loaded ZIF-8 nanoparticles induce ferroptosis for colorectal cancer therapy Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Jie Chen, Yan Liu, Yanting You, Ruisi Zhou, Yanchun Li, Xinghong Zhou, Xiaohu Chen, Ying Yang, Jinxiang Chen, Hiu Yee Kwan, Xiaoshan Zhao, Yuyao Wu
[Display omitted]
-
CuFeS2 nanozyme regulating ROS/GSH redox induces ferroptosis-like death in bacteria for robust anti-infection therapy Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Huidong Wang, Jiadong Guo, Yangzi Yang, Ning Wang, Xiao Yang, Liang Deng, Xiankun Cao, Zhaoyang Ran, Dong Fang, Kang Xu, Yingchun Zhu, Jie Zhao, Jingke Fu, Yongqiang Hao
[Display omitted]
-
Spatially resolved structural and chemical properties of the white layer in machined Inconel 718 super alloy Mater. Des. (IF 8.4) Pub Date : 2024-02-29 L. A. B. Marçal, H. Dierks, V. Bushlya, I. Lazar, D. Dzhigaev, Z. Ren, R. Rysov, A. Björling, M. Sprung, A. Mikkelsen, F. Lenrick, R. M'Saoubi, J. Wallentin
[Display omitted]
-
An application of pirfenidone-loaded, lung-targeted nanoliposomes for treating inflammation and early pulmonary fibrosis in ARDS Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Sheng Li, Wanshi Chen, Yuhua Zhong, Di Qi, Yiwen Tan, Renzi Zhang, Daoxin Wang
We administered GALA-PFD-Lip by tracheal injection, combined with the sialic acid-terminated sugar chains on the lung endothelium, and then transported the wrapped PFD to the cytoplasm through endosomal membrane fusion, thus achieving therapeutic effects of reducing ARDS lung inflammation, pulmonary oxidative stress, inhibiting EndMT and reducing pulmonary fibrosis.
-
Effects of elastic modulus of porous implants on success rate of implant surgery – An in vivo study using miniature swine model Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Yitong Liu, Wei Xu, Siyan Liu, Zhaona Liu, Ziqi Yan, Aihua Yu, Bowen Liu, Junji Xu, Xin Lu, Yi Liu, Lijia Guo
Dental implants are reliable fixtures for dental replacement in edentulous and partially edentulous patients. In this study, we designed and fabricated titanium implants with the same shape but with different porosities, and performed a detailed analysis of the effect of the porous structure on host biological response. The results indicate that the difference of elastic modulus between implant and
-
Triple-layered multi-functional membrane for synergistic enhancement of guided bone regeneration Mater. Des. (IF 8.4) Pub Date : 2024-02-29 Abdullrahman M. Al-Bishari, Tingting Liu, Jiatong Zhuang, Qihong Zhang, Jiaquan Chen, Yan Wang, Chuanyang Liu, Peng Gao, Jinsong Liu, Lei Lu
An illustration of how MFM electrospun membranes can enhance the healing of bone defects in infection-affected rats by demonstrating the process of creating the membranes as well as the results of the process.
-
Powder characterisation and the impact on part performance in electron beam melted Ti6Al4V Mater. Des. (IF 8.4) Pub Date : 2024-02-28 Alphons Anandaraj Antonysamy, Lakshmi Lavanya Parimi, Mahesh Kumar Mani, Christopher T Schade, Alexander J.G. Lunt
[Display omitted]
-
Combination of ab initio descriptors and machine learning approach for the prediction of the plasticity mechanisms in β-metastable Ti alloys Mater. Des. (IF 8.4) Pub Date : 2024-02-25 M. Coffigniez, P.-P. De Breuck, L. Choisez, M. Marteleur, M.J. van Setten, G. Petretto, G.-M. Rignanese, P.J. Jacques
[Display omitted]
-
Tailoring microstructure and mechanical properties of an LPBF-processed beta Ti-Nb alloy through post-heat treatments Mater. Des. (IF 8.4) Pub Date : 2024-02-24 S. Pilz, M. Bönisch, A. Datye, S. Zhang, F. Günther, S. Drescher, U. Kühn, U.D. Schwarz, M. Zimmermann, A. Gebert
[Display omitted]
-
Evolutionary mechanisms in the plastic deformation of γ'-Ni3(Al, Ti)-strengthened additively manufactured nickel-based 939 superalloys at intermediate temperatures Mater. Des. (IF 8.4) Pub Date : 2024-02-24 Tongfei Zou, Meng Liu, Quanyi Wang, Yunqing Jiang, Hao Wu, Zhenhuan Gao, Yubing Pei, Hong Zhang, Yongjie Liu, Qingyuan Wang
[Display omitted]
-
Scale-bridging phase-field approach for nucleation and microstructure evolution applied to the β to α phase transformation in pure titanium Mater. Des. (IF 8.4) Pub Date : 2024-02-24 Héléna Verbeeck, Vincent Feyen, Pushkar Prakash Dhekne, Nele Moelans
Modeling concurrent nucleation and growth in the phase-field framework on experimentally relevant length scales remains a significant challenge due to spatial resolution and driving force limitations. This work proposes a modeling framework that overcomes these challenges by integrating the explicit nucleation method within the recently developed high-driving force phase-field model to investigate
-
A novel machine learning method to exploit EBSD and nanoindentation for TRIP steels microstructures analysis Mater. Des. (IF 8.4) Pub Date : 2024-02-23 Federico Bruno, Georgios Konstantoupoulos, Gianluca Fiore, Edoardo Rossi, Marco Sebastiani, Costas Charitidis, Luca Belforte, Mauro Palumbo
-
Development of FeCoMnAl multi-principal element alloys and soft magnetic powder cores with excellent magnetic properties and high temperature magnetic stability Mater. Des. (IF 8.4) Pub Date : 2024-02-23 Liping Yang, Yaqiang Dong, Wei Gao, Xingjie Jia, Junyao Zhang, Yanqiu Li, Qiang Li, Qikui Man, Baogen Shen
-
One-pot synthesis of stable and fast Bi2O2S/Bi2O3 heterojunction self-powered photoelectrochemical sensors for sensitive detection of tetracycline Mater. Des. (IF 8.4) Pub Date : 2024-02-23 Baolong Shi, Bingyu Chen, Xinzhe Yan, Huyue Cao, Hao Sun, Dalei Wang, Changwei Bi, Chao Wang, Yueyue Wang, Chaoqing Dai, Wei Liu
-
The defect sensitivity of brittle truss-based metamaterials Mater. Des. (IF 8.4) Pub Date : 2024-02-23 Patrick Ziemke, Owen Finney, Ryan G. Chambers, Raphael Thiraux, Lorenzo Valdevit, Matthew R. Begley
Architected strut-based metamaterials fabricated via three-dimensional printing exhibit a wide range of geometric and material heterogeneity, including variations in strut size, surface roughness, embedded micro-cracks and disconnected struts. The locations and severity of these defects are highly variable; combined with the complexity of the structure itself, it is exceedingly difficult to identify
-
A triple junction energy study using an inclination-dependent anisotropic Monte Carlo Potts grain growth model Mater. Des. (IF 8.4) Pub Date : 2024-02-23 Lin Yang, Vishal Yadav, Joseph Melville, Joel B. Harley, Amanda R. Krause, Michael R. Tonks
This work presents a Monte Carlo Potts grain growth model in which the grain boundary (GB) energies depend on the GB inclination. The inclination is calculated using a linear smoothing approach developed by the authors. In bicrystal simulations with a shrinking grain, the grain changes shape to prefer low energy GB inclinations. However, in polycrystal simulations the preferred inclinations depend
-
Defect-induced fracture topologies in Al2O3 ceramic-graphene nanocomposites Mater. Des. (IF 8.4) Pub Date : 2024-02-23 E.N. Borodin, A.G. Sheinerman, O.Yu. Bushuev, M.Yu. Gutkin, A.P. Jivkov
Models of ceramic-graphene nanocomposites are used to study how the manufacturing process-dependent arrangement of reduced graphene oxide (rGO) inclusions governs nano-crack network development. The work builds upon recent studies of such composites where a novel combinatorial approach was used to investigate the effect of rGO arrangements on electrical conductivity and porosity. This approach considers
-
Emulsion templated composites: Porous nerve guidance conduits for peripheral nerve regeneration Mater. Des. (IF 8.4) Pub Date : 2024-02-22 Louis D. V. Johnson, Mina Aleemardani, Simon Atkins, Fiona M. Boissonade, Frederik Claeyssens
-
Ultrastrong gradient M50 bearing steel with lath-shape nano-martensite by ultrasonic shot peening and its enhanced wear resistance at elevated temperature Mater. Des. (IF 8.4) Pub Date : 2024-02-22 Fei Yin, Pengcheng Han, Qingyou Han, Huihui Wang, Lin Hua, Gary J Cheng
-
The characteristics and dynamics of fused silica-aluminum alloy welding during mJ-level femtosecond laser Mater. Des. (IF 8.4) Pub Date : 2024-02-22 Lin Zhang, Zhengwu Zhu, Jincheng Wen, Han Wu, Li Li, Xiuquan Ma
-
Mechanism of the effect of plastic deformation at different temperatures on the surface roughness of machined aluminum mirrors Mater. Des. (IF 8.4) Pub Date : 2024-02-22 Yunfan Fu, Shiquan Huang, Youping Yi, Hailin He, Juncheng Mao
-
Research progress and future prospects in glucose oxidase-like activity of Au NPs Mater. Des. (IF 8.4) Pub Date : 2024-02-20 Xin-Ting Hou, Tian-Ao Xie, Meng-Yi Han, Win Topatana, Sarun Juengpanich, Shi-Jie Li, Ke-Ying Fang, Hao-Lin Chen, Zhi-Ye Xu, Jia-Hui Wang, Ren-Yuan Li
[Display omitted]
-
A guide to unsupervised image segmentation of mCT-scanned cellular metals with mixture modelling and Markov random fields Mater. Des. (IF 8.4) Pub Date : 2024-02-20 Branislav Panić, Matej Borovinšek, Matej Vesenjak, Simon Oman, Marko Nagode
Characterising the structure of cellular metals is a difficult task. The internal structure of cellular metals can be determined using micro-computed tomography (mCT). However, mCT scanning provides digital images in greyscale with various problematic artefacts. In addition, the grey intensity of cellular metals usually varies greatly due to the internal porosity of the material. Therefore, binary
-
Advances in 3D printed periodic lattice structures for energy research: Energy storage, transport and conversion applications Mater. Des. (IF 8.4) Pub Date : 2024-02-20 S.A. Khan, M.A. Rahman, M. Khraisheh, I.G. Hassan
Lattice structures, with their exceptional characteristics such as high specific strength and stiffness, thermal insulation, and biocompatibility, find a wide range of applications including bio-medical, thermal, automobile and aerospace industry. This study explores their potential for energy research, provides an overview of Periodic lattice structure (PLS) design and fabrication, and classifies